Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Technician Smrekca's Avatar
    Join Date
    Jan 2011
    Location
    Mlaka
    Posts
    23
    Rep Power
    24

    MXM850 trouble F4-38

    Hi,
    i have problems with a Hercules MX-M850. when i turn it on, the machine gives me an F4-38 trouble. this should be an 38V problem. did anyone has got the same problem and how can i solve it?
    plese help?
    Thanks
    Last edited by Smrekca; 01-20-2011 at 01:02 PM.

  2. #2
    Service Manager 250+ Posts bonnie750's Avatar
    Join Date
    Nov 2007
    Location
    gateshead ,tyne and wear
    Posts
    302
    Rep Power
    34
    from the manual.


    Detail 38V voltage fall or 38V disconnected.
    Section PCU
    Cause Connection failure or disconnection of the connector
    and the harness.
    PCU PWB trouble.
    Power unit trouble, or blown fuse.
    HL PWB trouble. (relay)
    Check &
    Remedy
    Check the connector and the harness of the power line.
    Check the power voltage of 38V in the power unit and
    the PCU PWB.
    Check for blown fuse in the power unit.
    (Main power: F208


    Bill

  3. #3
    OMD-227
    Guest
    Check the HL pwb. CN6 pins 1,2,3 should have 38V, CN7 pins 6,7,8,9,10 should have 38V.
    The main power supply, powers the HL pwb. Check fuser 208 on the main power supply.

    Havent had this one myself yet, but keen to know the outcome.

  4. #4
    Technician Smrekca's Avatar
    Join Date
    Jan 2011
    Location
    Mlaka
    Posts
    23
    Rep Power
    24
    hello,

    i have checked all the fusers and they are all ok, i changed the hl pwb but no success. do you think that the main power supply is damaged?

    i think i will have to order one to check, becuose it is my only such device.

    thanks

  5. #5
    OMD-227
    Guest
    Yes, replace the main power supply. A check of the circuit diagram shows that all 38v lines come off that board. That is more likely than the PCU board being bad & not detecting the 38v line.
    Did you check the pins I listed above? That is the incoming 38v line to the HL pwb from the main power supply. It should be a dead giveaway.

  6. #6
    OMD-227
    Guest
    Any chance of an update on this one?

    Would love to know what the problem was, incase I see it here too.

  7. #7
    Technician Smrekca's Avatar
    Join Date
    Jan 2011
    Location
    Mlaka
    Posts
    23
    Rep Power
    24
    hello,

    sorry for my late reply.
    i changed the main power supply and the trouble dissapear.

    thanks for help wazza

    BR

  8. #8
    Junior Member
    Join Date
    Jun 2021
    Location
    kingston
    Posts
    2
    Rep Power
    0

    Re: MXM850 trouble F4-38

    can anyone give the part number for the power supply

  9. #9
    Junior Member
    Join Date
    Jun 2021
    Location
    kingston
    Posts
    2
    Rep Power
    0

    Re: MXM850 trouble F4-38

    no one knows where i can get a main power supply for mx-1100

  10. #10
    Senior Tech 250+ Posts mloudy's Avatar
    Join Date
    Oct 2015
    Location
    Greenville, OH
    Posts
    402
    Rep Power
    26

    Re: MXM850 trouble F4-38

    I spent a while looking for it in the Parts Manual but could not find it. I am sure it is in there but Sharp doesn't always name their parts what I think they should be. As I don't work on this model I also do not know where it is to be able to visually find it in the diagrams.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here