Thanks Thanks:  0
Dislikes Dislikes:  0
Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29
  1. #21
    Technician
    Join Date
    May 2017
    Location
    Leeds
    Posts
    11
    Rep Power
    0

    Re: Colorqube 9301 Harddisk replace

    Thank you and please, please do. I would need the video instruction.

  2. #22
    Technician
    Join Date
    May 2017
    Location
    Leeds
    Posts
    11
    Rep Power
    0

    Re: Colorqube 9301 Harddisk replace

    If you could point out in instruction which parts to look for to see the damage and check if it is bad before I order replacement. Thank you!

  3. #23
    Technician
    Join Date
    May 2017
    Location
    Leeds
    Posts
    11
    Rep Power
    0

    Re: Colorqube 9301 Harddisk replace

    The paper size is not a problem. There is A4 <> Letter paper substitution set up in settings.

  4. #24
    Technician
    Join Date
    May 2017
    Location
    Leeds
    Posts
    11
    Rep Power
    0

    Re: Colorqube 9301 Harddisk replace

    Is this the video? YouTube

  5. #25
    Senior Tech 100+ Posts
    Colorqube 9301 Harddisk replace


    Join Date
    May 2014
    Posts
    189
    Rep Power
    13

    Re: Colorqube 9301 Harddisk replace

    Quote Originally Posted by kurbads View Post
    Is this the video? YouTube
    Not the video but I will post one this weekend.

    Sent from my SM-T530NU using Tapatalk

  6. #26
    Senior Tech 100+ Posts
    Colorqube 9301 Harddisk replace


    Join Date
    May 2014
    Posts
    189
    Rep Power
    13

    Re: Colorqube 9301 Harddisk replace

    Quote Originally Posted by kurbads View Post
    If you could point out in instruction which parts to look for to see the damage and check if it is bad before I order replacement. Thank you!
    The correct piece to order is the entire pre-heat assembly. Just trying to replace bits and pieces of it is hopeless. Once the nylon gears start to shred they all go.

    Sent from my SM-T530NU using Tapatalk

  7. #27
    Technician
    Join Date
    May 2017
    Location
    Leeds
    Posts
    11
    Rep Power
    0

    Re: Colorqube 9301 Harddisk replace

    I ordered one. A used one from the listing you quoted. Can you advice how many warmups does it survive? Could it be what contributed to its premature death the fact that printer was resetting itself at midnight and reheating inks every day?

  8. #28
    Senior Tech 100+ Posts
    Colorqube 9301 Harddisk replace


    Join Date
    May 2014
    Posts
    189
    Rep Power
    13

    Re: Colorqube 9301 Harddisk replace

    Quote Originally Posted by kurbads View Post
    I ordered one. A used one from the listing you quoted. Can you advice how many warmups does it survive? Could it be what contributed to its premature death the fact that printer was resetting itself at midnight and reheating inks every day?
    How many sheets on the unit you have? They tend to get brittle gears and stance shutter at 750,000 copies. Sometimes you just have bad luck and they let go sooner. I will point out in the vid what to check for.

    The resets at midnight wouldn't cause this piece to fail. It dies due to copies and age.

    Sent from my SM-T530NU using Tapatalk

  9. #29
    Senior Tech 100+ Posts
    Colorqube 9301 Harddisk replace


    Join Date
    May 2014
    Posts
    189
    Rep Power
    13

    Re: Colorqube 9301 Harddisk replace

    If you look at 89-520 in the service manual figure 2. That sensor cap that the arrow points to always de-bonds from the shaft. Once it has let go your finished.

    Sent from my SM-T530NU using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here