Lunatech
Trusted Tech
Last Activity: 7 hours ago
Joined: 10-09-2012
Location: Eagle Point
-
Most of the occurrences of this code we have encountered have been on xxx4 series machines with very low print counts. We have had to replace the motor... -
If you haven't had enough coffee you could get stuck in a loop on this one. LOL....Leave a comment:
-
First of all, good job getting a toshiba out of the field! Secondly, that spring really does make a difference. I have simply stretched to original spring...Leave a comment:
-
Those new rails may or may not do any good. I have replaced them on dozens of these finishers and still have had numerous ones randomly get C8800. All...Leave a comment:
-
It does....Leave a comment:
-
Yes, many times. Typically there is something broken in the unit that is supposed to release the cartridge. One of the myriad reasons I have such a powerful...Leave a comment:
-
I have never worked on a 508. I have seen hundreds of 306, 307 and 308 models and had this scenario in a handful of them. I have gone down the same path...Leave a comment:
-
At this point I would think it has to be cabling. It does seem when the 4 series first came out we were getting HDD errors and that turned out to be faulty...Leave a comment:
-
I've seen something similar when using the web based KFS on an Android phone. Very jerky and frustrating. I figure it's just part of the smart phone experience....Leave a comment:
No activity results to display
Leave a comment: