Hi guys,
Title says it all, when I arrived the fuse in the plug was blown along with the fuses on the IHPU and NFB (also a blown cap on the...
7 results in 0.0104 seconds.
-
bizhub c658 with 3B09 error
-
10-377 in Dc12
Hi,
Can anyone help me with 10-377 in Dc12?
I hv replaced all 4 thermistors, Heater rods glow momentarily & the code is flashed.... -
5000
I have a canon Ir 5000 i am trying to connect it but everytime i put a hard drive in it it codes. i have tried new hard drives and flashed hard drives.... -
Need help on Konica 7145
Loop clutch not activating (no 24v volt to loop clutch) . I tested all other components using mode 47 and they were fine. Replaced print control board,HVDC1,loop... -
km 2550 C0210
I had a tech flash a machine and now it has a c0210 code and will not reset. I tried flashing with a new card the machine takes the flash, but the code... -
Imagistics cm 4520 (bizhub c-450) c-4765
This code is a hardware time-out.
What I've got going on is when I go into service mode
and then state conformation and run a check on the...
