Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2015
    Location
    albania
    Posts
    171
    Rep Power
    0

    Lexmark E260dn ready light is red on power

    I have an lexmark e260dn with the ready light showing a solid red light when the printer is turned on. Printer doesnt warm up, there are no noises coming from it, and the PC doesnt even recognize it trough the USB...

    Help, please?



  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    346
    Rep Power
    9

    Re: Lexmark E260dn ready light is red on power

    If you double-click the Continue button (green button with the "Play" icon), does it show another light pattern?


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2015
    Location
    albania
    Posts
    171
    Rep Power
    0

    Re: Lexmark E260dn ready light is red on power

    only red


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Nov 2013
    Location
    Sydney
    Posts
    152
    Rep Power
    11

    Re: Lexmark E260dn ready light is red on power

    Would guess electronic issue. Main PCB, LVPS etc.


  5. #5
    Senior member of CRS 2,500+ Posts
    Lexmark E260dn ready light is red on power

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,951
    Rep Power
    80

    Re: Lexmark E260dn ready light is red on power

    Quote Originally Posted by Orion2010 View Post
    only red
    Are you able to get into diagnostic mode (usually holding down the 3 and 6 when powering up)?
    There you can get a fault log that may point to the problem.

    "You can't trust your eyes, if your mind is out of focus" --

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    346
    Rep Power
    9

    Re: Lexmark E260dn ready light is red on power

    Are you able to get into diagnostic mode (usually holding down the 3 and 6 when powering up)?
    The E260 doesn't have a "num pad". Only two buttons (Continue & Cancel).

    It looks like a fatal error. I'm thinking formatter.

    Does this unit have an accessory tray installed? If it does, remove it. Get it down to the base unit. Remove all cables except the power cable.

    I've seen where accessory trays cause problems.


  7. #7
    Senior member of CRS 2,500+ Posts
    Lexmark E260dn ready light is red on power

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    2,951
    Rep Power
    80

    Re: Lexmark E260dn ready light is red on power

    Quote Originally Posted by Lance15 View Post
    The E260 doesn't have a "num pad". Only two buttons (Continue & Cancel).

    It looks like a fatal error. I'm thinking formatter.

    Does this unit have an accessory tray installed? If it does, remove it. Get it down to the base unit. Remove all cables except the power cable.

    I've seen where accessory trays cause problems.
    Thank you, I don't have a current manual.

    "You can't trust your eyes, if your mind is out of focus" --

  8. #8
    Junior Member alinc2016's Avatar
    Join Date
    Nov 2016
    Location
    Timisoara, Timis
    Posts
    7
    Rep Power
    0

    Re: Lexmark E260dn ready light is red on power

    Which of the lights is on?

    Attached Images Attached Images

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here