If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It seems like once every other month, I come up on a job that, no matter what I do, I'm just spinning my wheels.
Does this happen to other techs?
I mean that no matter what part I install, it either doesn't fix the machine, or it somehow magically causes other problems, and the call remains a thorn in my side that just won't quit.
I have had entire days where I either can't fix anything or have made it worse attempting to fix it.
It seems like once every other month, I come up on a job that, no matter what I do, I'm just spinning my wheels.
Does this happen to other techs?
I mean that no matter what part I install, it either doesn't fix the machine, or it somehow magically causes other problems, and the call remains a thorn in my side that just won't quit.
Leave a comment: