canon ir3300

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • eddie mags
    • Jun 2025
    #1

    canon ir3300

    canon ir3300 can make copies most of the time the problem is some times when you hit the print button
    it will go right to jam in the middle of the machine. no paper found. turn off machine turn back on
    machine will work. printing to copier after end of print goes into same jam. cleaned and changed
    paper feed rollers. looking for help
    thank you
    Tags: canon, copier, copies, dirty, feed rollers, ir3300, jam, navigating, paper, print, printing, time, work
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22999
      #2
      Re: canon ir3300

      What jam codes and/or error codes are stored? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • eddie mags
          #3
          Re: canon ir3300

          just shows paper jam. no codes
          turn the copier off and back on and it works. no paper found
          thank you
          ed

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22999
              #4
              Re: canon ir3300

              There are jam codes. Enter service mode > display > error

              If you're having difficulty navigating service mode, you should get yourself a manual.
              Paul? Where are you? We need some more of that magic. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9838
                  #5
                  Re: canon ir3300

                  I have this Parts & Service manual.

                  Email me if interested.

                    Comment

                    • LaurenBrown
                      #6
                      Re: canon ir3300

                      i have to say I currently own canon ir3025n that i am very proud off

                        Comment

                        • eddie mags
                          #7
                          Re: canon ir3300

                          jamming code 1081 cleaned dirty sensors in the finisher section.
                          was working when i left today.
                          will check again tomorrow.

                            Comment

                            Previous template Next
                            Working...