Recommendation for tabletop that can do 10x14 no frills necessary

[axyun]

Have customer works out of home. Cannot accommodate floor model machine.
Must be able to sit on large table or desk yet must do 10x14. Which may mean 11x17
machine. Customer will only be copying, so no other features are required. Also a machine
with a decent profit margin would be desirable. Frank/ActionPhotocopy

[blackcat4866]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Back in the analog days there were plenty of A3 tabletop machines. But since the transition to digital almost all segment 1 & 2 machines (tabletop) are A4. Segment 3 & 4 machine are usually A3 (with a few notable exceptions), but all are too tall to sit comfortably on any kind of a tabletop. I can't think of a single modern model that fits your criterion. =^..^=

[KenB]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Shades of the Canon GP200.

The horror!

[JR2ALTA]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Have customer works out of home. Cannot accommodate floor model machine.
Must be able to sit on large table or desk yet must do 10x14. Which may mean 11x17
machine. Customer will only be copying, so no other features are required. Also a machine
with a decent profit margin would be desirable. Frank/ActionPhotocopy

If you need 11x17 forget about a table top. But you can take an MFP and put in on a table. Just don't buy a cabinet or extra cassettes...

http://usa.copystar.com/americas/jsp/upload/product/22284/0/CS%20255%20Spec%20Sheet_LR.pdf

This machine is dummy proof. Every consumable component removes without screws.

[Zeldaman]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Hi there!
Take a short look at the RICOH MP 305+. A-3 is possible over ADF & bypass. Looks a little like R2D2, but it works.
Greetings...

[axyun]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Thanks guys. It doe not have to be 11x17 but needs to copy 9 1/2 x 12 1/2. In meantime I will
look into the ricoh mp305spf.

[Brianneoe]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Hey Frank, The Ricoh brand would work best as far as I know because of the driver command setting.
ttyom

[axyun]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

thanks brian. customer wants to copy only.

[allan]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

brother a3 mfc-j3520

Well i like it.

[axyun]

Re: Recommendation for tabletop that can do 10x14 no frills necessary

Thanks Allan