[Error Code] IRAC2030 E733-005 + other errors

[copier tech]

Hi all, bit stuck on this one, been to an IRAC2030 that throws various E7xx errors, i'veseen this a few times on the older irc2380 series but not on the IRAC series.
I removed all the Ram & dims etc & all theconnections to the DC controller etc, re-assembled but same error. Occasionallythe machine will come to ready & allow me to print etc but after 5 mins orso it will error again.

Am I looking at DC controller, Ram, HDD??

[teckat]

Re: IRAC2030 E733-005 + other errors

Friend says his experience is with that
Flexible Cable between the DC Controller PCB and the Main Controller PCB 2.

[apoxi]

Re: IRAC2030 E733-005 + other errors

Hi all, bit stuck on this one, been to an IRAC2030 that throws various E7xx errors, i'veseen this a few times on the older irc2380 series but not on the IRAC series.
I removed all the Ram & dims etc & all theconnections to the DC controller etc, re-assembled but same error. Occasionallythe machine will come to ready & allow me to print etc but after 5 mins orso it will error again.

Am I looking at DC controller, Ram, HDD??

Do you resolve this problem?

[copier tech]

Re: IRAC2030 E733-005 + other errors

Yes, my collegue went back with the ribbon cables as mentioned by teckat he also replaced the dc controller, however I suspect it was only the cables causing the issues

[raptaqua]

Re: IRAC2030 E733-005 + other errors

Also the low voltage power supply (FM3-8179) can cause this error.
if that's broken it can give you 3-5 different error codes.