Canon iR ADV C5051 Set Limit Colour

[darknet93]

Hi, how do i set Limit colour setting for iR ADV C5051 ?
means the step by step for Colour only & for both (B&W and Colour)

Thank You

[MunsterTech]

Re: Canon iR ADV C5051 Set Limit Colour

isnt that thru the smart head and then pin codes where you can set limits? is that what you mean?

[charm5496]

Re: Canon iR ADV C5051 Set Limit Colour

Question :
How do you Prevent Color Copies using Department ID?

Answer :
To prevent Color copies from being made using Department id, follow these instructions.

1) Select [Additional Function].

2) Select [System Settings].

3) Select [Department ID Management].

4) Select [ON].

5) Select [Register Dept.ID/Password].

6) Select [register].

7) Enter a Department ID number with a password.

8) Select [Turn Limits ON/OFF and Set Page Limit].

9) Select [Color Copy Limit] and turn [ON] and leave counter to 00000.

10) Press [OK]

If you try to make a copy the copier will not permit you. You will get an error message: [Reached counter Limit. The printing/reserved jobs may be stopped. Check the print logs].


For imageRUNNER ADVANCE Models

1) Select [Settings/Registration].

2) Select Login

3) Enter The System Mgr and System Pin and press [Login].

4) Select [Management Settings]

5) Select [User Management].

6) Select [Department ID Management].

7) Follow directions from step 4 above

[darknet93]

Re: Canon iR ADV C5051 Set Limit Colour

Question :
How do you Prevent Color Copies using Department ID?

Answer :
To prevent Color copies from being made using Department id, follow these instructions.

1) Select [Additional Function].

2) Select [System Settings].

3) Select [Department ID Management].

4) Select [ON].

5) Select [Register Dept.ID/Password].

6) Select [register].

7) Enter a Department ID number with a password.

8) Select [Turn Limits ON/OFF and Set Page Limit].

9) Select [Color Copy Limit] and turn [ON] and leave counter to 00000.

10) Press [OK]

If you try to make a copy the copier will not permit you. You will get an error message: [Reached counter Limit. The printing/reserved jobs may be stopped. Check the print logs].


For imageRUNNER ADVANCE Models

1) Select [Settings/Registration].

2) Select Login

3) Enter The System Mgr and System Pin and press [Login].

4) Select [Management Settings]

5) Select [User Management].

6) Select [Department ID Management].

7) Follow directions from step 4 above

WOW Thanks its help me a lot. now if i want to make no need to key in ID for Black&White only for colour need ID. how do i set it ?

[copier tech]

Re: Canon iR ADV C5051 Set Limit Colour

& what about restricting print too, is there a colour PDF available for this?

[charm5496]

Re: Canon iR ADV C5051 Set Limit Colour

you can change those settings under settings/registration.

allow B/W copies and prints or leave everything locked down. However you choose to set it up.