check your document

[tsmitherman]

Re: check your document

[ATTACH=CONFIG]34057[/ATTACH]

see that attached file, this is a fairly common issue with these DADF's if they are in a high use area

i seen this on e-support i pull the fan and traced the wires. i didnt find anything that looked bad, and the fan works

[tsmitherman]

Re: check your document

I have had that on the advance series. It is always a flag (that actuates sensor) out of place (usually right after the feed roller). Don't know about this series but something to check. Luckily I don't have but a couple of these models in the field.

I have replaced all the sensors still check your document after pressing start.

[tsmitherman]

Re: check your document

Does the green light on the feeder come on?

Have you tried a sens-init
copier > feeder > function > sens-init

the green light does come on. have tried sens init no luck

[charm5496]

Re: check your document

1473282307517.jpg

see that attached file, this is a fairly common issue with these DADF's if they are in a high use area

[dan7777]

Re: check your document

canon ir5055 document feeder dadf-s1 "check your document" message apears on screen soon as i hit start

I have had that on the advance series. It is always a flag (that actuates sensor) out of place (usually right after the feed roller). Don't know about this series but something to check. Luckily I don't have but a couple of these models in the field.

[Tricky]

Re: check your document

Does the green light on the feeder come on?

Have you tried a sens-init
copier > feeder > function > sens-init

[tsmitherman]

canon ir5055 document feeder dadf-s1 "check your document" message apears on screen soon as i hit start