[CQ] Image press c800 uneven quality

[gksapple]

Hi
facing uneven density on solid colors

* while printing some solid colors uneven density of color happening in the output

* top rear edge of image having this issue( that is the top rear edge is darker than the rest of the image)

action taken
*to confirm the issue ,printed the pg 5 ,only its happening with magenta and other colors are ok
*cleaned the dv unit sleeves as manually and service mode 2 (dvs-clnx)
*and replaced all the colors drums (life expired )
*but the problem was there before and after replacing of the drum

kindly have look on the attachment [ATTACH]34299[/ATTACH]

[raptaqua]

Re: Image press c800 uneven quality

have you updated the firmware?
have you tried init + stir ?

does it come to every paper type? and what is that paper that you are using?

[roho]

Re: Image press c800 uneven quality

I'd check the mag dev assembly itself first, see if there's a good coating of toner on the dev next since you've changed the drums. I run pg 5's at 55, and 128 density usually, but a 255 setting can be good to determine "tiger striping", where the dev becomes depleted on one side, run a few 11x17.