IR3100CN - Dead harddisk

[copier tech]

Re: IR3100CN - Dead harddisk

If the machine has been in storage for a while as stated the pressure roller forms a "flat spot" the will cause a blurr on the prints.

However with use this may improve.

[cs.dk]

Re: IR3100CN - Dead harddisk

The machine still works great.. I've used it on/off for a period of time now, so i trust it.

Is it the drum unit or the developer unit I need to get rid of the striped prints? Anyone got a link to what I need?

Thanks, and merry christmas

[cs.dk]

Re: IR3100CN - Dead harddisk

No one that can help me finding the spareparts i need?

[zoraldinho]

Re: IR3100CN - Dead harddisk

What kind of stripes? The picture above has a fuser problem.
Print PG-10 from service mode and post a pic.

[cs.dk]

Re: IR3100CN - Dead harddisk

Thanks mate.

This is PG10 if I did i right

[copier tech]

Re: IR3100CN - Dead harddisk

As I said before this white band is caused by the fuser unit.

Your only option is to replace it.

You may however have better results using thicker paper, just ensure you change the paper settings to reflect the paper weight you are using.

[cs.dk]

[copier tech]

FC5-0726-000 & FC5-0727-000

[cs.dk]

[cs.dk]

Re: IR3100CN - Dead harddisk

This seems like a good price - IF they can deliver it, doesn't it? Canon Fixiereinheit FM2-0174-190 Fuser Unit Original

Am I correct the fuser assembly is FM2-0174-190?

[copier tech]

Re: IR3100CN - Dead harddisk

This seems like a good price - IF they can deliver it, doesn't it? Canon Fixiereinheit FM2-0174-190 Fuser Unit Original

Am I correct the fuser assembly is FM2-0174-190?

Depends what country/voltage your country is using?

Where are you located?

I would deffo go with replacing the complete fuser unit, its not that easy to replace the rollers, lots of plastic cover that will most likely break being so old now.

[cs.dk]

Re: IR3100CN - Dead harddisk

I'm located in Denmark. = 230V supply.

Old plastics and breaking it, i know the drill.

[copier tech]

Re: IR3100CN - Dead harddisk

Yes so FM2-0174-190 is correct.

Try ringing round some Canon dealers in Denmark, you may find they have them in stock & will be keen to let them go!

Also eBay is a good source of parts.

[cs.dk]

Re: IR3100CN - Dead harddisk

It is quite possible that some dealers have NOS parts laying around. I'll give that a go.

Thanks a lot for your help