[CQ] void going thru black

[dsutton13]

i know dev/drm would be first assumption. but look at PGs. pg5/15 you see void. pg10 looks fine. ????

[zoraldinho]

Re: void going thru black

Printer Model??


It's look like black developer.This is standard issue where the problem is visible only on the halftone.PG-10 is 100% cover.

[dsutton13]

Re: void going thru black

Printer Model?? iradv c5035.


It's look like black developer.This is standard issue where the problem is visible only on the halftone.PG-10 is 100% cover.

iradv c5035. another tech went out for the same thing not long ago and did change dev/drm. still getting this. visually inspected dev, ran cln function. weird.

[JParker]

Re: void going thru black

Has the laser been cleaned?

[dsutton13]

Re: void going thru black

Has the laser been cleaned?

yes it has.

[madas]

Re: void going thru black

Had similar and had to take laser units out in the end and open it up and clean the mirrors manually, in a metal factory. So if you are in a dusty enviroment and only used the blue cleaner I would check that, same model by the way.

Hope this helps
Les

[zoraldinho]

Re: void going thru black

iradv c5035. another tech went out for the same thing not long ago and did change dev/drm. still getting this. visually inspected dev, ran cln function. weird.

If you still getting this with new developer then clean laser assy must resolve the mystery.If you can make the force stop and check image on the drum and belt to eliminate the doubts between laser and transfer.

[petermays]

Re: void going thru black

hi..thats inside your laser.the lens is dirty.
boy the cq you have on all colours is bad.rep the drum kits.and clean charge rollers.