Canon iRC2880 toner feed issue E020-200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • foundry
    Technician
    • Apr 2011
    • 20
    #1

    Canon iRC2880 toner feed issue E020-200

    Looking for experience. Toner feed motor was not feeding toner as well as not functioning in test mode. Driver board was replaced and all was good until now.
    Appears that toner is once again not feeding and I am looking for some experience out there.

    Any input greatly appreaciated
    One Look is worth a thousand guesses
    Tags: None
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8172
      #2
      Re: Canon iRC2880 toner feed issue E020-200

      Most likely the toner hopper motor has failed & is shorting out the board you replaced!
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • foundry
          Technician
          • Apr 2011
          • 20
          #3
          Re: Canon iRC2880 toner feed issue E020-200

          Thanks for the assist..... Strange though a short. Haven't seen a motor short on a copier in all my 30 plus years. I'll check just the same.
          One Look is worth a thousand guesses

            Comment

            Previous template Next
            Working...