Is there any way to Disable Canon iR3045 Toner Sensor to ignore showing Replace Toner cartridge Message and keep printing even after toner gets over.
Disabling Canon IR3045 Toner Sensor.
Collapse
X
-
Re: Disabling Canon IR3045 Toner Sensor.
Why would you want to do that ? do you want blank pages printing out ? -
Re: Disabling Canon IR3045 Toner Sensor.
When it start shows replace toner cartridge.. it doesnt goes off even if i fill 300Grams of toner it goes only when i fill more than 600 - 700 grams of toner.. i feel its like Pain in @$$. BTW is it possible to do that?Comment
-
-
Re: Disabling Canon IR3045 Toner Sensor.
Wow just Wow! Our users just chuck a new toner in. No problem, its a machine...I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.Comment
-
Comment
-
Comment
-
Re: Disabling Canon IR3045 Toner Sensor.
What a stupid question to ask! This is a "technical" forum
When you "spoon in" x ammount of toner into the bottle it is then feed into the hopper, if you are not spooning in enough to fill the hopper the "add tonner" message will remain.Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
-
Re: Disabling Canon IR3045 Toner Sensor.
I'm pretty sure Shahn is from India so he may need to be creative with Toner/Parts/Etc
That reminds me, What aver happened to my favorite Algerian SuperTech, Zaza?Comment
-
Re: Disabling Canon IR3045 Toner Sensor.
"Creative?" If you want to run a car you cant put less fuel in it, you can buy cheap fuel but still need the same ammount!Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
Comment