Hi I am looking some help. I have a Canon E355-001 error and I am trying to locate what is causing it. I have located the counter pcb which looks secure the main contoller pcb looks fine and the ECO ID PCB connectors are secure I am struggling to locate the SRAM would someone be able to point this out for me? thanks.
-
-
Re: Canon 5045 SRAM
Theres a specific clear mode in special service mode to rest this error.
This error isually appears after someone tries to wipe the main counter.........Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
-
Re: Canon 5045 SRAM
2016
All imageRUNNER ADVANCE Series / All imagePRESS Series / All imageRUNNER Series
E350 / E355 / E748 Error Codes
Counter PCBs and SATA Flash PCBs are no longer available for purchase. As a result, please handle E350 / E355 and E748 in the following manner:
E350 / E355 Error Codes:
Call the Technical Support Center (1-800-528-2830).
E748 Error Codes:
Refer to the Service Manual. If the Service Manual states, Contact to the Sales Companies, stop and call the Technical Support Center (1-800-528-2830).
*NOTE 1: For any of these error codes, do not swap any PCB's from any other machine. Doing so may render both machines unrecoverable.
*NOTE 2: Do not use any of the User Mode or Service Mode clears when encountering these error codes. :
(Executing the Service Mode or User Mode clears may render the machine unrecoverable.**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment
Comment