Canon ir adv 8105 e824-000

[tinnyjay]

Hi.
I know there is FM2, but changed the fan and still code is remaining.
In pcb2 its connected to J130 and i want to know if i can change any relay that affects FM2.
Thank you

Forget it...solved!

[apollo]

Re: Canon ir adv 8105 e824-000

Hi

would be nice to share you results on with forum members

[zoraldinho]

Re: Canon ir adv 8105 e824-000

He probably missed something obvious.

[tinnyjay]

Re: Canon ir adv 8105 e824-000

Hi

would be nice to share you results on with forum members

Yes, you are right. I am sorry. It was more necessary to fix it at the time and i did it.
It started with a pre-transfer corona problem and after that i cutted 3 wires of developing/corona fans.
I forgot the copier was on (my bad) and trying to connect the wires i just made a short circuit
And E0824-000 was persistent. And through service manual i found where the wire go in main board.
It was J130. Close to J130 were 4 relays and after i tested the relays through a multimeter i found 2 of them dead.
Were two 1.5 A relays and i had many of them from the old/defected boards. I fixed for 5 mins.
I never faced problem like this before(with relays), but mainly after a short circuit, its the relay that reacts first. So what i learned from physics is right
Now its working perfectly!
BYE
s-l1600.jpg