User Profile
Collapse
-
Also check fuser, as you mentioned vertical line, most likely caked up itb blade hardened up . -
In User Tools → System Settings → Administrator Tools → Display/Clear/Print Counter per User, choose Scanner...👍 1Leave a comment:
-
Change Storage board with latest Firmware few weeks ago on C300i.Leave a comment:
-
I had brand new C300i causing same issues, changed laser unit under warranty.👍 1Leave a comment:
-
I been using 2Gb SD card for years formatted to fat32 no issues to update FW romdata & package👍 3Leave a comment:
-
-
Drawer connector of the fusing unit may be not connected correctly to the machine and then machine cannot detect the pressure roller home position (Non-pressure...Leave a comment:
-
Also check the power source is not plugged in extension cable., should be direct to wall socket.Leave a comment:
-
I swapped fuser as customer has 2x mfd side by side n had no problem since than.
weird , as I have changed thermopile, thermistors update FW et...Leave a comment:
No activity results to display
Show More
Leave a comment: