canon IR C3220

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4426
    #1

    canon IR C3220

    Was at this customers office for a Kon/Min I sold them and they asked me to look at this Canon machine. Not too familiar with canon but have worked on many over the years. Didn't have a lot of time so looked at it real fast. Looks like it needs black drum. I have the Serv manual but only saw how to install drums when first setup. Is there any trick to removing a drum already in the machine. I tried to pull the blk drum and it wouldn't come out. I'm sure I could have figured it out if I had more time or maybe it's in the manual and I just missed it. Is there a trick to get the drums out?

    Also what settings / adjustments are done after new drum is installed.

    Thanks in advance
    Tags: canon, drum, drums, time
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8059
      #2
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4426
          #3
          Re: canon IR C3220

          Thanks copier tech. I must of not pulled on the drum hard enough. It wouldn't come out. As long as I know I don't have to do anything special I'll just pull on it harder. Good to know they are end user replaceable. Puts my stupid tech mind at ease.

          Any suggestions where to get these at a good price?

          Thanks again

            Comment

            • Brian8506
              Service Manager

              Site Contributor
              1,000+ Posts
              • Feb 2009
              • 1651
              #4
              Re: canon IR C3220

              Originally posted by copyman
              Thanks copier tech. I must of not pulled on the drum hard enough. It wouldn't come out. As long as I know I don't have to do anything special I'll just pull on it harder. Good to know they are end user replaceable. Puts my stupid tech mind at ease.

              Any suggestions where to get these at a good price?

              Thanks again
              The key is to lower the big blue handle which lowers the transfer assembly away from the drums


              Sent from my iPhone using Tapatalk

                Comment

                • teckat
                  Field Supervisor

                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16092
                  #5
                  Re: canon IR C3220

                  Originally posted by copyman
                  Was at this customers office for a Kon/Min I sold them and they asked me to look at this Canon machine. Not too familiar with canon but have worked on many over the years. Didn't have a lot of time so looked at it real fast. Looks like it needs black drum. I have the Serv manual but only saw how to install drums when first setup. Is there any trick to removing a drum already in the machine. I tried to pull the blk drum and it wouldn't come out. I'm sure I could have figured it out if I had more time or maybe it's in the manual and I just missed it. Is there a trick to get the drums out?

                  Also what settings / adjustments are done after new drum is installed.

                  Thanks in advance
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    Previous template Next
                    Working...