adv irc5250

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • onmyski
    Technician
    • Oct 2012
    • 15
    #1

    [Dead] adv irc5250

    main board has gone out for the 2nd time in a week any ideas?
    Tags: 2nd, ideas, main, time, week
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 7931
      #2
      Re: adv irc5250

      Originally posted by onmyski
      main board has gone out for the 2nd time in a week any ideas?
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • onmyski
          Technician
          • Oct 2012
          • 15
          #3
          Re: adv irc5250

          when you power on you get green light and stanby light only, no rotaion or sound. they said control panel stoped responding first, happened after restart. same as last time.
          Tried main board in another machine, same thing. no codes. When I replaced main board last time, worked for 9 days.

            Comment

            • guitar9199
              Service Manager

              Site Contributor
              1,000+ Posts
              • Sep 2016
              • 1097
              #4
              Re: adv irc5250

              Originally posted by onmyski
              when you power on you get green light and stanby light only, no rotaion or sound. they said control panel stoped responding first, happened after restart. same as last time.
              Tried main board in another machine, same thing. no codes. When I replaced main board last time, worked for 9 days.
              First thing I would look into are power coming into the machine, and find out if they're running "Power Over Ethernet". I've seen both cause issues.

                Comment

                • onmyski
                  Technician
                  • Oct 2012
                  • 15
                  #5
                  Re: adv irc5250

                  Originally posted by guitar9199
                  First thing I would look into are power coming into the machine, and find out if they're running "Power Over Ethernet". I've seen both cause issues.
                  After the first time we swap places with it and a irc5035, the irc5035 has had no issues with ether location

                    Comment

                    Previous template Next
                    Working...