After Firmware Update the Job Status/Monitor is Missing on C5045

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • techandtrader
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jun 2016
    • 318
    #16
    Re: After Firmware Update the Job Status/Monitor is Missing on C5045

    Maybe a good time to upgrade to the 5200 series instead. You can use the fuser and all the consumables from your c5045. MMI clear in the past would wipe just user settings and esp. network settings. I have never heard of trial meap apps. For the price a Scan and Print at the same time function can be accomplished with a DR-c240 instead for a lot less money.
    I have used Canon Imagerunner parts for sale. Most are floor model Color and / Advances Imagerunner with some 3025 3235 parts. Several intact machines being parted.

      Comment

      • kevinds
        Technician
        • Feb 2019
        • 10
        #17
        Re: After Firmware Update the Job Status/Monitor is Missing on C5045

        Originally posted by techandtrader
        Maybe a good time to upgrade to the 5200 series instead. You can use the fuser and all the consumables from your c5045. MMI used to just take out the network settings and user settings and not Licenses.
        Not sure, I didn't have network access back at that point.. I did the Initialize all Settings that you suggested, that definitely took out the licenses if the MMI didn't.

          Comment

          • nicknt82
            Trusted Tech

            100+ Posts
            • Nov 2011
            • 155
            #18
            Re: After Firmware Update the Job Status/Monitor is Missing on C5045

            Originally posted by kevinds
            Howdy,

            I updated the firmware on my/our C5045 printer, trying to get SMTP sending to work. After a few reboots and profanity shouted at the email provider, that is working..

            My issue since rebooting has been that the Status/Monitor function is missing from the on-device display.

            If I log in with the web-interface, I can see the status, but it is missing the Restart Job function that the on-device view offers.

            Pressing the Status button, I can see the Consumables tab information, but the actual 'Tabs' are missing for Copy/Print, Send, Receive, and Store.

            Yes, I have read the manual, searched the forum and the web. I read the manual again and again.

            I am sure it is a 'check-box' somewhere, but I can't find it.

            What did I do/change and how can I fix it?

            Thank you,

            Kevin

            Try this: SM level 2

            4.jpg

              Comment

              • kevinds
                Technician
                • Feb 2019
                • 10
                #19
                Re: After Firmware Update the Job Status/Monitor is Missing on C5045

                Originally posted by nicknt82
                Try this: SM level 2

                [ATTACH=CONFIG]41950[/ATTACH]
                Close,
                It was actually set BML-DISP to 0

                Screwed up other things before figuring that out though... Oh well, live and learn I suppose

                  Comment

                  Previous 1 2 template Next
                  Working...