MF6540 fuser exit jams

[copywiz]

Fuser jams right at exit roller. Replaced fuser no change.
Think Ive see this before but been a long time. Exit roller are on the new fuser assembly.
Saw an adjustment plate on front side but not making a difference.

Ideas?
TIA
Copywiz

[teckat]

Re: MF6540 fuser exit jams

Fuser jams right at exit roller. Replaced fuser no change.
Think Ive see this before but been a long time. Exit roller are on the new fuser assembly.
Saw an adjustment plate on front side but not making a difference.

Ideas?
TIA
Copywiz

---

pain in the butt printer////----------also believe there was a spring replacement on left side door ( added xtra one ) way back

pdf procedure attached