[Dead] Service Support Tool and firmware for Canon IRC3080

[Guest]

We have received a donated Canon IRC3080. After using it for several months it now stuck at the progress bar when the machine is booting up.
Is this probably caused by a bad hard drive?

If anyone has idea on where to obtain the Service Support Tool and firmware so that I can create a new hard drive to save the machine please message me or contact me on btlinechat@gmail.com

Thanks!

[copier tech]

Re: Service Support Tool and firmware for Canon IRC3080

We have received a donated Canon IRC3080. After using it for several months it now stuck at the progress bar when the machine is booting up.
Is this probably caused by a bad hard drive?

If anyone has idea on where to obtain the Service Support Tool and firmware so that I can create a new hard drive to save the machine please message me or contact me on btlinechat@gmail.com

Thanks!

Either firmware or failing HDD.

Try switching the machine off then back on while holding keys 1 & 9 this boots up & does a CHKDSK.

Failing that reload system software we can supply should you need it,

https://www.copiefirmware.co.uk