[CQ] Ir 3235 canon

[aakash2411]

Facing this issue in ir 3235 .I have replaced drum unit and developer unit but still same issue.
The developer unit was not rotatating at first .I had to remove motor assembly section and fixed same after inspection.

DP unit know runs but copy quality has back ground and black dots.

[Brian8506]

Re: Ir 3235 canon

Still looks like a drum pattern. Could be the hvt. I only had to replace one but the symptom was similar


Sent from my iPad using Tapatalk

[Kkh]

Re: Ir 3235 canon

Facing this issue in ir 3235 .I have replaced drum unit and developer unit but still same issue.
The developer unit was not rotatating at first .I had to remove motor assembly section and fixed same after inspection.

DP unit know runs but copy quality has back ground and black dots.

Change your HVT . For the black dots, remove all the ink in developing then rub a little alcohol on the magnet roll slowly do not press too much when wiping it. just float while rotating

[aakash2411]

Re: Ir 3235 canon

Change your HVT . For the black dots, remove all the ink in developing then rub a little alcohol on the magnet roll slowly do not press too much when wiping it. just float while rotating

Hi

The problem has solved .the issue was main motor gear unit.i was creating trobles.

Thank u all

[Kkh]

Re: Ir 3235 canon

Hi

The problem has solved .the issue was main motor gear unit.i was creating trobles.

Thank u all

Ok. Have a nice day