Canon c5045

[copier tech]

Re: Canon c5045

Need firmware. I got sst 4.83. Irc adv c5045

Happy to help drop us an email

www.copierfirmware.co.uk

[teckat]

Re: Canon c5045

Also this is canon machine itself. OEM HDD firmware already installed by canon themselves. All i would be doing is registering firmware i.e. creating certificate. Which wont be copyrighr issue at all. Also i am otherwise lawyer by profession and won't indulge into reselling firmware. This is for my personal use. I can guarantee that and take full responsibility for legality of my acts.

---

Possible Firewall issue
HTTP traffic is being blocked before getting to the device.

[teckat]

Re: Canon c5045

Also this is canon machine itself. OEM HDD firmware already installed by canon themselves. All i would be doing is registering firmware i.e. creating certificate. Which wont be copyrighr issue at all. Also i am otherwise lawyer by profession and won't indulge into reselling firmware. This is for my personal use. I can guarantee that and take full responsibility for legality of my acts.

---

Copier > Option > FNC-SW > CDS-UGW and set it to "1"

These settings are in the same service mode location as CDS-UGW and are defined as CDS-Firm and CDS-MEAP.

Configure CDS for Scheduled Firmware Update for Canon Controllers? The copier can download and install System Software automatically by following these steps: 1) Service Mode Level 1 2) Select Copier 3) Select Option 4) Select FNC-SW5) Enter 1 for each of the following: CDS-FIRM CDS-UGW CDS-LVUP 6) Press Ok 7) Reboot the Copier. 8) Your Screen should now have a Schedule Update section. You can access this by: a) Settings/Registration. b) Login in as System Manager and password. c) Select Management Settings d) Select License/Other e) Select Register Update Software f) Select [Schedule Update] settings and change to ON g) For [Update Schedule], you MUST select either Weekly or Biweekly and, the day of the week, as well as military time. h) For [Apply at] select military time and press OK.

[omkara1234]

Re: Canon c5045

[QUOTE=teckat;1672450]

---

Copier > Option > FNC-SW > CDS-UGW and set it to "1"

These settings are in the same service mode location as CDS-UGW and are defined as CDS-Firm and CDS-MEAP.

Configure CDS for Scheduled Firmware Update for Canon Controllers? The copier can download and install System Software automatically by following these steps: 1) Service Mode Level 1 2) Select Copier 3) Select Option 4) Select FNC-SW5) Enter 1 for each of the following: CDS-FIRM CDS-UGW CDS-LVUP 6) Press Ok 7) Reboot the Copier. 8) Your Screen should now have a Schedule Update section. You can access this by: a) Settings/Registration. b) Login in as System Manager and password. c) Select Management Settings d) Select License/Other e) Select Register Update Software f) Select [Schedule Update] settings and change to ON g) For [Update Schedule], you MUST select either Weekly or Biweekly and, the day of the week, as well as military time. h) For [Apply at] select military time and press OK. Thank you so much for your contribution. Unfortunately I tried what is shown dot---- to dot.. instructions. however the communication with server is not getting through because of error --- certificate get configuration error code 8202 4206. still searching for correct answer. I tried to install private key from digitalcertificate.com and it dont work either. generated own key with SHA512 and 2048 but it wont work either.

[teckat]

Re: Canon c5045

[QUOTE=omkara1234;1674416]

---

Copier > Option > FNC-SW > CDS-UGW and set it to "1"

These settings are in the same service mode location as CDS-UGW and are defined as CDS-Firm and CDS-MEAP.

Configure CDS for Scheduled Firmware Update for Canon Controllers? The copier can download and install System Software automatically by following these steps: 1) Service Mode Level 1 2) Select Copier 3) Select Option 4) Select FNC-SW5) Enter 1 for each of the following: CDS-FIRM CDS-UGW CDS-LVUP 6) Press Ok 7) Reboot the Copier. 8) Your Screen should now have a Schedule Update section. You can access this by: a) Settings/Registration. b) Login in as System Manager and password. c) Select Management Settings d) Select License/Other e) Select Register Update Software f) Select [Schedule Update] settings and change to ON g) For [Update Schedule], you MUST select either Weekly or Biweekly and, the day of the week, as well as military time. h) For [Apply at] select military time and press OK. Thank you so much for your contribution. Unfortunately I tried what is shown dot---- to dot.. instructions. however the communication with server is not getting through because of error --- certificate get configuration error code 8202 4206. still searching for correct answer. I tried to install private key from digitalcertificate.com and it dont work either. generated own key with SHA512 and 2048 but it wont work either.

Ok