D1650 touch screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4059
    #1

    D1650 touch screen

    Is there a way to calibrate the touch screen on these small models? Are parts available for this model to replace the screen? Or are they throw away models not worth repairing?

    Thanks for the help
    Tags: models, replace, screen, throw, touch
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22601
      #2
      Re: D1650 touch screen

      Between your labor charge and the cost of the screen (assuming it's available), you're most of the way to $600 for a new one. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • copyman
          Owner / Technician

          Site Contributor
          2,500+ Posts
          • Sep 2005
          • 4059
          #3
          Re: D1650 touch screen

          Originally posted by blackcat4866
          Between your labor charge and the cost of the screen (assuming it's available), you're most of the way to $600 for a new one. =^..^=
          That's was I was thinking. Thanks for confirming. Think the machine sells new for around $600

            Comment

            Previous template Next
            Working...