Need parts or part #s for IR C3380i DADF pad and feed clutch spring

[mjunkaged]

Got a customer with a pad so worn it's got a 1/4" divot worn into it. Feed-in torsion clutch spring is broken in two ( I think) and it will turn backwards to lift pickup roller but won't turn forward to feed-in paper. Rollers look okay still, I'm guessing they won't need replacing but if you've dealt with this problem before I'm all eyes!! TIA.

[mjunkaged]

Disregard, found a feeder and urged the customer to not waste money on the old turd.

[copier tech]

Great machine back in the day! I bet some veteran techs on here have the DF parts needed

[nicknt82]

Got a customer with a pad so worn it's got a 1/4" divot worn into it. Feed-in torsion clutch spring is broken in two ( I think) and it will turn backwards to lift pickup roller but won't turn forward to feed-in paper. Rollers look okay still, I'm guessing they won't need replacing but if you've dealt with this problem before I'm all eyes!! TIA.

This Separate pad can use mutual with old Canon copier machine as R 3570, iR 4570, iR 3530, iR 4530, iR 2230, iR 2270, iR 2830, iR 2870, iR 3025, iR 3030, iR 3035, iR 3045, iR C2880, iR C2880i, iR C3380, iR C3380i, iR C2380i, iR C2550, iR C2550i, iR C3080, iR C3080i, iR C3480, iR C3480i, iR C3580, iR C3580i

[techandtrader]

I have several of these pads I need to sell. Please contact if you need. I think they are extinct elsewhere!!!!!

[mjunkaged]

Wish you saw this post when I posted it - the customer didn't want to fix it due to there only being an entire used feeder unit available at the time. But thanks anyway! ALSO needed the torsion spring it was broken in half.