Canon C5850i damage transfer belt

[mackon91]

In the Canon C5850i device at the 500k pages I replaced the transfer belt along with the transfer cleaner assy, after printing 90k pages the belt wore out as in the picture. All materials are original. Replacement in accordance with the service manual procedure. Does anyone have an idea why this happened?
pas1.jpg pas2.jpg

[zoraldinho]

ITB cleaning blade is not ok. They have changed the code twice already. Check if you are using the latest one.FM1-R475-20

[mackon91]

ITB cleaning blade is not ok. They have changed the code twice already. Check if you are using the latest one.FM1-R475-20

I used FM1-R475-010 because I don't have this latest modification available in the official distribution. interesting...

blade assy.jpg

[zoraldinho]

This blade is also ok. This happens often, which is why a bulletin was published on this topic on 15 Jan 2025.

[Larhal]

This blade is also ok. This happens often, which is why a bulletin was published on this topic on 15 Jan 2025.

Could you share that bulletin with me please?

[Londo]

here you go

[Larhal]

here you go

Thank You very much.

[techandtrader]

Also I hear we should be checking transfer roller bearings for resistance. I hear loose toner can cover them and cause the to get sticky. What else is there to know about these units?

[techandtrader]

Also I hear we should be checking transfer roller bearings for resistance. I hear loose toner can cover them and cause the to get sticky. What else is there to know about these units?

[techandtrader]

Is AKD / ASD Also known as HP Colorlok ? https://www.colorlok.com/