Picked up some of these from wholesaler. I have one that isn't playing nice. I noticed residue on the film that was showing up as trash on the copy. 2 main areas (streaks). I could see crud on the film, so I replaced the film. the new film film immediately had the same issue. I dumped and vacuumed the dv unit, and supplied new genuine toner. the problem persisted still yet. I stopped the image at the drum, and the copy looks good until the fuser film.....If I choose heavy paper, it looks great but slows it down, of course. I'm assuming there is just a problem in the fuser, but just seems odd to me, as I don't know where this matter is coming from. I'm well rehearsed in the 42xx series, and this doesn't look much different. Is there a setting that is recommended to change? Fix-cln? I did adjust the temp up but didn't make much difference.
IMG_2236.jpgIMG_2236.jpg66553833137__6FBC49A5-A20F-4417-BEBD-139AC87B31F9_2.jpg
IMG_2236.jpgIMG_2236.jpg66553833137__6FBC49A5-A20F-4417-BEBD-139AC87B31F9_2.jpg
Comment