hello everyone
attended this machine for error E025-0468, got a replacement C/K toner bottle drive, fitted it OK, powered the machine up, it ran up and printed "Communication management Report TX/RX" but no display! only main power and energy save lamps on
ADF notices paper and comes ready, lift ADF and scanner moves/lamp lights, IP ping OK, web interface comes up (though i couldn't login, tried multiple regular logins) and of course it won't print
i assume the main controller board is the problem, though i thought i'd check for any tips/suggestions before i go there
thanks in advance!
attended this machine for error E025-0468, got a replacement C/K toner bottle drive, fitted it OK, powered the machine up, it ran up and printed "Communication management Report TX/RX" but no display! only main power and energy save lamps on
ADF notices paper and comes ready, lift ADF and scanner moves/lamp lights, IP ping OK, web interface comes up (though i couldn't login, tried multiple regular logins) and of course it won't print
i assume the main controller board is the problem, though i thought i'd check for any tips/suggestions before i go there
thanks in advance!
Comment