Laggy machine canon 6055

[Uniquer]

I have a Canon 6055 which when i pull power button on it take a while to give load screen then it work.
I suspected the hdd , I have another hdd with firmware ,if I do swap it will work directly or I should download software though
Thanks for your support

[zoraldinho]

Re: Laggy machine canon 6055

1. You replace the hdd
2. Format the hdd in download mode
3. Install new firmware

If the hdd is not from the same generation same PN) it will not work.
I would first reload the firmware before changing it.

[wassem]

Re: Laggy machine canon 6055

I have a Canon 6055 which when i pull power button on it take a while to give load screen then it work.
I suspected the hdd , I have another hdd with firmware ,if I do swap it will work directly or I should download software though
Thanks for your support

i think it is a power supply error

[copier tech]

Re: Laggy machine canon 6055

I have a Canon 6055 which when i pull power button on it take a while to give load screen then it work.
I suspected the hdd , I have another hdd with firmware ,if I do swap it will work directly or I should download software though
Thanks for your support

Yes I too would suspect the HDD.

As others have said if its from the same generation then try a straight swap, if you get an E602 - xxxx error format the HDD in the SST & reload the system software.

[Uniquer]

Re: Laggy machine canon 6055

Unfortunately, I replaced HDD with another one from a working machine, it worked directly but the same problem.I suspect now the controller but power supply is excluded idea I think.

[copier tech]

Re: Laggy machine canon 6055

Unfortunately, I replaced HDD with another one from a working machine, it worked directly but the same problem.I suspect now the controller but power supply is excluded idea I think.

Is it just the panel running slow? The IRA C20/22 series had the sane issue caused by the control panel CPU.

[Uniquer]

Re: Laggy machine canon 6055

Is it just the panel running slow? The IRA C20/22 series had the sane issue caused by the control panel CPU.

When i power it up the power led only light up but nothing on screen for about 5 minutes then loading screen comes up and works normally then.

[Canuck]

Re: Laggy machine canon 6055

Reseat RAM,etc on controllers for a start. Usually it's a HDD or RAM issue when they are lazy Try a new HDD if reseating pcbs/RAM , formatting, flashing HDD,RAM/controller clearings, initialize all data,etc don't help it..6000s have been around for a while and a used HDD might act similar. I get drives from Nationwide. RAM could be "flakey"(lol) too

[Uniquer]

Re: Laggy machine canon 6055

Reseat RAM,etc on controllers for a start. Usually it's a HDD or RAM issue when they are lazy Try a new HDD if reseating pcbs/RAM , formatting, flashing HDD,RAM/controller clearings, initialize all data,etc don't help it..6000s have been around for a while and a used HDD might act similar. I get drives from Nationwide. RAM could be "flakey"(lol) too

Thanks for reply

I replaced hdd with the same issue
Do all types of clears in the function mode and intialized hdd but nothing working.
I cleaned both rams but the same problem.

What i do fear is if i bought controller may be the problem be from power supply. I dont know

[Venom]

Re: Laggy machine canon 6055

Sounds like main controller is bad