[Misc] Canon iR Adv DX C5850 ADF not available

[Buenor]

Hi,
I have a problem with ADF in Adv DX C5850i. There is a message "Feeder needs to be checked". Flatbed is working. I cleared DC-CON, MN-CON. Firmware updated. Flex cables reseated. I checked a document present sensor in service menu and it is working, but there is no sound. Opening the ADF cover doesn't show an opening message. Looks like dead.
In service menu, ADF type is shown as a 2, but I've checked in another same machine and there is a type 1. Maybe it is a solution, but how I can change it...
Do you have any ideas?

[Buenor]

Re: Canon iR Adv DX C5850 ADF not available

No one?

[wcanonw]

Re: Canon iR Adv DX C5850 ADF not available

No one?

IRadv6055 - DADF Limited Functions

[wcanonw]

Re: Canon iR Adv DX C5850 ADF not available

No one?

"The feeder needs to be checked"

[Buenor]

Re: Canon iR Adv DX C5850 ADF not available

Hmm I used a searching and nothing discovered... :/

Thank you a lot for your answers. I will be tomorrow by the machine and try your suggestions 👍

[Buenor]

Re: Canon iR Adv DX C5850 ADF not available

Nothing helped me... I've put main controller from other machine and DADF is working.
generally it is very strange, because during power up the machine DADF is moving (initial check), all sensors answer in service menu...
Swapping indicated that the main controller is faulty, but... at all? maybe the DADF function is stucked in OFF position, but I can't see the option to turn it ON.
Is there any other option to reset/clear a main controller? I cleared dc-con, r-con, mn-con i CLEAR section of Service Mode, but nothing helped

[wcanonw]

Re: Canon iR Adv DX C5850 ADF not available

Hello good morning, do you have another similar printer? If you have another similar printer there you should place the dadf that is failing and see if it is the problem of the dadf.
Have you done maintenance and cleaning of the dadf? You have to clean mirrors, glass, white dadf roller or white glass filter with lint free cloth and isopropyl alcohol. After having done that, enter the DADF service mode and make settings such as init sens or regist, I don't have the service manual now, but you have to make settings so that the machine recognizes and recalibrates the DADF sensors.

Feeder not working

[Buenor]

Re: Canon iR Adv DX C5850 ADF not available

Hello, yes, I put a main controller to another device and there is also a problem with DADF... and yes, the dadf is clean.
I cleaned R-con, or you have something else on your mind?
It is possible to recalibrate if main controller shows DADF is not connected? I will try, nothing to lose

[Buenor]

Re: Canon iR Adv DX C5850 ADF not available

Do you have any idea how to cut off a RTC battery for a moment to reset whole main controller?
I'm searching any connectors and points, but nothing looks proper...

[wcanonw]

Re: Canon iR Adv DX C5850 ADF not available

replace unit reader and dadf

[Canuck]

Re: Canon iR Adv DX C5850 ADF not available

Error codes logged in service mode?