[Jamming] sensor broken on saddle finisher y-2

[jafi]

Hi everyone,

I am new here and I have a problem with my saddle finisher Y-2. Opening the upward flap of the finisher You can see what is on this photo:
Finisher.jpg

The black sensor, where the yellow circle is in the photo, is broken. Is it easy to repair? Partnumber? I can't ask for the service manual of the finisher because I'm new here but I would appreciate some help.

Thank You

jafi

[copier tech]

Re: sensor broken on saddle finisher y-2

Here is the parts manual, good luck.


https://mega.nz/file/ERdCjDba#xPeIcR...AnT7byEhrIPHBg

[colinmarketson]

Re: sensor broken on saddle finisher y-2

Did you solve this problem?

[jafi]

Re: sensor broken on saddle finisher y-2

Hi,

yes, I am lucky. I could repair the lever. Thanks to the manual I could disassemble e few parts and saw the lever wasn't broken but escaped from its holder only. A little push back and all is ok.

Thanks a lot for Your support.
jafi