Hi everyone,
I am new here and I have a problem with my saddle finisher Y-2. Opening the upward flap of the finisher You can see what is...
78 results in 0.0301 seconds.
-
sensor broken on saddle finisher y-2
-
MX-FN22 saddle skew
Anyone ever have to adjust the skew of 11x17 after saddle stitch has taken place? When you look at the folded print, the top line of paper doesn't line... -
SD-506 Saddle Stitcher Receiver
Accurio Press c3080 with SD-506 is giving Replace Saddle Stitcher Receiver message and indication when it was just replaced and counters reset. Anyone... -
SD-511 vs SD-512 Saddle Stitch Kit compatiblity in FS-534 (square peg/round hole)
Hi all.
I've been looking for a SD-511 Kit to install into my FS-534 finisher attached to my BizHub c454e with no luck. While it looks like... -
Finisher FS-536 with saddle stitch sd-511
Konica C368 series copier. Customer complaining that they cannot do more than 23 center folded booklets for their church before it stops and forces them... -
MX-FN29 Question
Has anyone had any luck bypassing the Saddle Stich Tray Full Detection on the MX-FN29 finishers? Most Saddle Finishers we have been able to remove the... -
IRA 6055
I have a 6055 with saddle Finisher E1 and punch unit. Customer did some server updates and asked me to update the firmware. Everything went smooth except... -
Canon IR ADVANCE C5030 Booklet Finisher
I have a Canon IR ADVANCE C5030 here at my customers site. Which has a booklet saddle stich finisher as I can see the lower staples in the booklet maker... -
Check stapler in saddle stitch on ES 4505ac with MJ 1110 finisher
Also got the above mentioned issue and all seems good with the staples and staple cartridge and the holders as well. Rest of finisher and machine works.If... -
Mx-5141 Jamming after messing with saddle stitch staples
Mx-5141 with Mx-fn10 with saddle stitch. Client tried to change saddle stitch staples but said a little black part came out(picture included) and after... -
6075 Finisher saddle stitcher
안녕하세요 !! 6075 피니셔 중철 스티 처 a4, a3 및 b4 용지가 정상적으로 인쇄 될 때 용지가 걸리지 않습니다. 그러나 중철 스티 처를 인쇄 할 때는 b4 만 있으면됩니다. 원인은 무엇입니까 ???? ... -
Finisher-AN1
Hi
Having Saddle fold alignment issue in finisher-AN1 .please have a look on the adjustment.
thanks & Regards ... -
fn-18 intermittently stops in saddle stitch
This doesn't jam every time. After about eight it decides to stop in the saddle stitch area. Will sometimes make a rubbing type sound that indicates a... -
Imagepress c1000vp(E0005f1-8000-02)
Hi
facing an error E0005f1-8000-02 in a booklet finisher An2.
Issue :saddle fold and stapling is not in right position so tried to... -
Booklet Finisher SD-534 paper jam at saddle stitcher
Hi,
after working fine for months no paper passes the saddle stitcher; it curls there. Jam location: 36, no jam code displayed.
I attached...
