Canon IR 210 lift

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nmfaxman
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1702
    #1

    Canon IR 210 lift

    Been too long since I worked on this box.
    Lower lift plate locked up and I can't remember how to make it drop.
    I know it is simple but I am having another Mucking Funday.
    Help.
    Why do they call it common sense?

    If it were common, wouldn't everyone have it?
    Tags: 210, canon, faci, lef, lift, locked up, release
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22946
      #2
      There's a white button on the surface of the PF unit that you can access through the front of the cassette port that will drop the lift plate. Usually there's more to it though. Stripped ratchets, broken springs, etc. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • mrfixit51
          Lead Service Technician

          1,000+ Posts
          • Oct 2008
          • 1975
          #3
          this may help...

          Originally posted by nmfaxman
          Been too long since I worked on this box.
          Lower lift plate locked up and I can't remember how to make it drop.
          I know it is simple but I am having another Mucking Funday.
          Help.
          You can remove the screws from the front side of the paper feed asm, that would be the left side of the asm as you are facing the right hand side of the copier. Pull the asm towards you at the front a bit and the lift gears should disengage from each other.

          If that fails, just pull the entire feed asm out...

          good luck
          "Once a King, always a King, but once a Knight is enough!"

            Comment

            • andy21557
              Help Desk Technician

              50+ Posts
              • Jul 2009
              • 62
              #4
              ir210 lifter arm

              Sometimes you can take grab the lifter plate ARM push it in towards the rear of the ppr feed unit the arm will release

                Comment

                Previous template Next
                Working...