Canon service support tool

Thanks, thanks, thanks...bro!!

I have SST, the latest techpubs and other stuff and it`s all free just follow the link below, don`t belittle yourself by asking for stuff here have some dignity. Seems like some posters here are just waiting for an opportunity to insult techs who ask for stuff. I am appalled and ashamed to read some of their posts.
Here is the link Free File Hosting Made Simple - MediaFire
If you don`t find what you`re looking for email me at john@techmanualarchives.com

If anyone thinks that this is FREE advertising, they can go fu_k themselves.

Thank you very much, spent a lot of time trying to get it, I am been a technician for the last 15th years, simply thanks from cancun mex!!.

[teckat]

teckat , can we do a hdd cloning on canon ir5000i , thx for sharing

I never clone the HDD> you could try it

teckat , can we do a hdd cloning on canon ir5000i , thx for sharing

[kazihaha]

find a working 3225 remove good HDD >CLONE IT> PUT IT BACK> REMOVE BAD HDD> PUT THE CLONED FIRMWARE ON IT

you mean copy "disk to disk" right? But i can't find a 3225 good HDD, anyone have it?

[teckat]

Excuse me teckat, clone and copy what file to HDD?

find a working 3225 remove good HDD >CLONE IT> PUT IT BACK> REMOVE BAD HDD> PUT THE CLONED FIRMWARE ON IT

[kazihaha]

U can Clone the HDD and copy it to HDD

U can not use SST to copy firmware from a IR to another IR

Excuse me teckat, clone and copy what file to HDD?

[teckat]

Hello everybody .

I need the SST for an Canon IR 1018 .

I get the Download Standby error on startup.

I have tryed to short-out the JP141 pins method , and no luck.
I have pulled out the DDR , putted back again and the printer started fine , until the next restart .
I want the SST , to copy the firmware from another IR1018 that works fine , and transfer it to the broken one .

Please send me the SST to service@silverink.ro

Thanks in advance !!

U can Clone the HDD and copy it to HDD

U can not use SST to copy firmware from a IR to another IR

[kazihaha]

Sorry to ask more but anyone have 3225N firmware?

[mrfixit51]

And please tell me where can I get HDD support's list for this Canon 3225N?

There is no such list. Find out what make/model of hard drive is in the copier and buy the same one out in the world.

[mrfixit51]

I want the SST , to copy the firmware from another IR1018 that works fine , and transfer it to the broken one .

You need the System Software for your device. You cannot copy firmware from one copier to another, SST just does not work that way.

[kazihaha]

The HDD was falled down.

[philip1davies]

Has the HDD failed or does it just need formatting and where are you based?

[kazihaha]

Hi Everyone.

I need SST for Canon 3225N to replace the hdd. The HDD from Canon is too expensive.
And please tell me where can I get HDD support's list for this Canon 3225N?

Please send me the SST to kazihaha@yahoo.com

Thanks in advance !!

Help

Hello everybody .

I need the SST for an Canon IR 1018 .

I get the Download Standby error on startup.

I have tryed to short-out the JP141 pins method , and no luck.
I have pulled out the DDR , putted back again and the printer started fine , until the next restart .
I want the SST , to copy the firmware from another IR1018 that works fine , and transfer it to the broken one .

Please send me the SST to service@silverink.ro

Thanks in advance !!

[mrwho]

Read? What? He just learned how to type, he must now know how to read TOO? That's preposterous!!!