Canon clc 1180

[Luther]

I have a code on this machine which Im not to familiar with, E072-0202 which i think has something to do with the transfer cleaning or polishing units,anyone familiar with this code or model, any help would be appreciated, thanks in advance

[charm5496]

That code is the board and motor inside the transfer drum up top. Motor is held in by two screws that come out the front. I would replace them as a set as the motor over heats and then damages the board.

[Luther]

Thanks already changed that motor and board..............not the problem

[anothertech]

Check/Clean the interlock switches, when they get dirty inside they can drop some voltage sometimes resulting with this error.