iR Advance C-5051 Motor Test in Service Mode...

[bubblegoose72]

I am beating my head against the 1092 page manual, and can find about all I want to know about the I/O mode except how to activate a motor!

Thanks for taking a look.


Chris

[charm5496]

copier>function>part check>mtr-on

chapter 8 page 248 gives you a description of the motors. However the book you are looking must be missing pages as mine has 1132

[SCREWTAPE]

The procedure hasn't change much.

[teckat]

I am beating my head against the 1092 page manual, and can find about all I want to know about the I/O mode except how to activate a motor!

Thanks for taking a look.


Chris

I/O MODE OPERATIONS

Service Mode
Chapter 8-130

595 of 1131 pgs.

[Magebomba]

trg ftw!!

also remember motor #s dont always match the i/o #

also.. ctrl-f is a wonderful thing for any manuals, especially over 1000 page ones!

[teckat]

simple search

I/O is
Always under Service Mode in manuals

Asktheexpert..JPG

[Magebomba]

meant to say prt-chk # for motor is sometimes not the same as the actual motor # for the machine, not i/o

[hemai2005]

I/O MODE OPERATIONS

Service Mode
Chapter 8-130

595 of 1131 pgs.

Hi all
what about of quality for this machine ir advance 5051 & 90 series ?
some customers complain about the quality!!!!
do you have any remarks?
thanks

[teckat]

Customers should not complain/ u get what u pay for/ that is what a Demo is for/ if u sell new machines with out a Demo/ it's your fault.

all Canon printers have their good points & bad points

[charm5496]

Hi all
what about of quality for this machine ir advance 5051 & 90 series ?
some customers complain about the quality!!!!
do you have any remarks?
thanks

With the mods that Canon is updating the machines with and running good quality paper the machines are good. The harder the customers run them the better they are so far.

[SCREWTAPE]

My clients love the IRA as for now. Lets see in about 3 years.

[hemai2005]

Customers should not complain/ u get what u pay for/ that is what a Demo is for/ if u sell new machines with out a Demo/ it's your fault.

all Canon printers have their good points & bad points

this series (more advanced ,we know that,the demo not our story now)and in our area realy have many cases complain from the quality
screwtab said Lets see in about 3 years ----------may be--------

[teckat]

this series (more advanced ,we know that,the demo not our story now)and in our area realy have many cases complain from the quality
screwtab said Lets see in about 3 years ----------may be--------

Customers do lie about production when it comes to Color/ they want Printing Press quality on a Copier/ with all these name changes on machines, when u get down to it _ 'It's only A Copier'