48 results in 0.0584 seconds.
-
Taskalfa 250ci Toner Container Motor Removal
Recently replaced fuser, drum black developer and transfer belt and ran all adjustments on Taskalfa 250ci that a customer inherited . Copier worked fine -
RICOH MP C2011
This machine does not run forced toner for black. The motor that drives black toner is not turning, but the pump motor right below is running perfect.... -
MX-TU16 shift motor part #
Anyone know if this is available? I have 2 tubs with no motors. DONT ask..lol my guys are like.. I have no idea where they are. -
FS-533 stack actuator
I have a machine with an FS-533 internal finisher that has managed to knock the stack actuator loose.
Unfortunately, I can't... -
MX-4070V L4-02 error
Copier gives intermittent L4-02 codes (Lift motor) we have swapped out all the lift motors, checked all the connections to the lift motors, moved the... -
HP M880 adf question
Last Friday I went and put adf kits in two of these and cleaned them. Cust calls this morning and says one won't pull paper. I think maybe the holder... -
Bh550i no screen, no LEDs, only motors
Good morning all.
A colleague is checking out a 550i with a black screen, no leds and only the motors can be heard running.
... -
Sharp MX-4050 Restart Loop
I have this machine just suddenly started doing this. I power on the machine, it begins to boot. Scanner lamp does it's thing, screen stays black. Engine... -
MP C 6003 J019 jams
I have been dealing with an MP C6003 with a constant J019 jam. Leading edge comes to the fuser, but stops there. I have changed fuser and entire 2nd transfer... -
Bizhub 360i with code C-7107
Just wondering if anyone has seen this code in the field. Service manual says to replace AU motor or the baseboard. I have replaced both. Reseated all... -
Problema MP 501
Good afternoon people.
I have a problem with an MP 501, I will try to explain as much as possible what happens in it.
When we turn on the... -
C-0104 in BIZ PRO 1100
hello ,
can you please help me in this case ,
i have the error code in 1100, new machine , i switch betwen the motors, but without... -
IM C3500 ADF JAMMING
We have issues on NEW 5 IMC3500 Machines.All are having ADF paper jam. No paper jams only when start copyin, the ADF feed unit will go down but the rollers... -
Versant 80 advice
K&C dispense motors are not running in CC.
Motors are fine as tried swapping with M&Y.
Tried new MCU and paper handling... -
Drum Unit Motors Question XEROX WC7120/WC7220
Hi everyone again !
Im seeing several Color Drums Units showing warning to change soon the same (Because they are low on usage) , my question is...
