Is there Anyone In the Flint, MI area who can fix my copier clc900

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • LGEM
    #1

    Is there Anyone In the Flint, MI area who can fix my copier clc900

    I keep getting an error code E010 and it cuts off.
    Tags: area, canon, canon color, clc, clc900, code, copier, cuts, dealer, e01, e010, error, error code, issue, legit, light, long, off, parts, qualified, service, side, system, tech, technician, technology
    • KenB
      Geek Extraordinaire

      2,500+ Posts
      • Dec 2007
      • 3945
      #2
      It sounds like you are trying to get a technician to do this "on the side".

      PLEASE, do yourself a favor, and get service through an authorized Canon dealer.

      If parts are needed, you can only get them from a dealer; even if the "moonlight" tech worked for a dealer, he'd most likely have no way to legally get you the parts you need.

      Keep in mind that a CLC900 isn't exactly a machine for amateurs or beginners; you need a real tech.

      You also have the issue of warranty on the work performed, that only a legit dealer can provide.

      While the dealer's labor rates will be higher, it will be way more than worth it in the long run.
      “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16084
          #3
          Originally posted by LGEM
          I keep getting an error code E010 and it cuts off.


          E010

          too many things to go over on this out of production printer
          -The main motor (M4) may be faulty.
          -The main motor drive system is subjected to an overload.
          -The main motor driver PCB may be faulty.
          -The DC driver PCB may be faulty.
          -The CPU PCB may be faulty.

          heed the advise of KenB


          TheEnd..jpg
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • SCREWTAPE
              East Coast Imaging

              Site Contributor
              2,500+ Posts
              • Jan 2009
              • 3396
              #4
              CLC's are good machines

              But, its time to advance to modern technology

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22922
                  #5
                  I'm not far, but I haven't worked Canon Color. Like Ken said, you really need a qualified guy with this model. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16084
                      #6
                      Originally posted by LGEM
                      I keep getting an error code E010 and it cuts off.

                      Give Mike's agent a call> 310-248-2000                       / he can fix anything/and knows your area (:
                      michaelmoore..jpg
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • charm5496
                          Service Manager

                          Site Contributor
                          1,000+ Posts
                          • Apr 2008
                          • 2387
                          #7
                          Originally posted by LGEM
                          I keep getting an error code E010 and it cuts off.
                          You need a front door switch. WC8-5051-000.

                          If you need instructions let me know. It is not that difficult to do if you can not find a tech.
                          Accidents don't just happen. They must be carelessly planned.

                            Comment

                            • teckat
                              Field Supervisor

                              Site Contributor
                              10,000+ Posts
                              • Jan 2010
                              • 16084
                              #8
                              could also be a door magnet issue
                              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                                Comment

                                Previous template Next
                                Working...