iR-c3200 - Colors out of alignment.

[mrfixit51]

Re: iR-c3200 - Colors out of alignment.

As you seem to have covered all the mechanical bases, you might try clearing
DC-Con and re-entering your data.

BUT ONLY DO SO AFTER OBTAINING A P-PRINT OR LABEL PRINT!!

Failure to have those printouts stored with the machine will be a grave mistake.

You can try the Clear operation and test the print registration without re-entering
the saved settings yet. You will know right away if that helped, but by all means,
do re-input those settings.

good luck

[Adrian_Boy]

Re: iR-c3200 - Colors out of alignment.

This is the home positioning, or be less adjusted?

IMG_20150208_214307.jpg

[teckat]

Re: iR-c3200 - Colors out of alignment.

This is the home positioning, or be less adjusted?

[ATTACH=CONFIG]27945[/ATTACH]

================================================== =====

3200_Laser gear.JPG

[Adrian_Boy]

Re: iR-c3200 - Colors out of alignment.

Ok... i see now, thanks again Mr.