Canon C1 4 color dots across page

[teckat]

Quick Question
The C1 is working fine except those dots.
I do not think its from the pre charge carona
Is there a setting on the HV and Grid to bring down.
were at 999 hv and 464 grid.

Any setting to bring down to stop this arc/ pitting?

What is the enviorment where you have the printer/ how is the circulation around it / hope it's not pushed against the wall/

have u check the filters

[SCREWTAPE]

I think this thread belongs here as well.

http://www.copytechnet.com/forums/canon/41143-new-pre-trans.html

Penvy, this one is for you.

[teckat]

I think this thread belongs here as well.

http://www.copytechnet.com/forums/canon/41143-new-pre-trans.html

Penvy, this one is for you.

SCREWTAPE, great post & pics **************
Believe it or not, I told him about that issue a week ago , don't think he took it to heart


one week ago>>posted quote>
"Got in touch with Canon Engineering pal/ he said there is a updated
Drum Assembly it comes with the adjusted Pre-Trans guide/& limits the rising up"

[SCREWTAPE]

SCREWTAPE, great post & pics **************
Believe it or not, I told him about that issue a week ago , don't think he took it to heart


one week ago>>posted quote>
"Got in touch with Canon Engineering pal/ he said there is a updated
Drum Assembly it comes with the adjusted Pre-Trans guide/& limits the rising up"

I remember..

[Penvy]

hey guts I got it,
I read read read, I can say this.
You guys are great and really get the info fast.
The environment is a small office and no problems with humidity or temps.
The pre trans guide thing I know about
I am on it
Thanks again.

[Canuck]

don't think it will work on a photosensitive drum/ but u never know till u try


heard a rumor that a tech used it on a selenium drum nick, then used nail polish over it

don't think they work on printers anymore/
was moved to car/body shop repair

[ATTACH=CONFIG]6613[/ATTACH]

Used nail polish on old Xerox selenium drums all the time years ago.....just get a blank dot,ok for bw/text