Canon CLC3200 out of focus copies.

[teckat]

Get a Service Manual/ Read & Learn/ that is the only way to go !!!!!!!!!!!!!!!!!!!

[tinnyjay]

When u hit service mode Ith *28*, in the screen where u select copier. U can hit *2 to go into service mode level 2. U can find more settings there.

Thank you
I'll try tomorrow

[tinnyjay]

Adjust-V-COUNT,COLOR,HV-PRI,HV-TR
adjustments are in Level 2

[ATTACH=CONFIG]6679[/ATTACH]
[ATTACH=CONFIG]6680[/ATTACH]
[ATTACH=CONFIG]6681[/ATTACH]

Is it possible you explain me what is Level 2?
I enter Service Mode,go to Test,put all numbers there 1,4,8,10 and doesnt print any test.
How can be this possible or what does effects on this?

[Fer]

When u hit service mode Ith *28*, in the screen where u select copier. U can hit *2 to go into service mode level 2. U can find more settings there.

[teckat]

In Service Mode missing some commands like Adjust-V-COUNT,COLOR,HV-PRI,HV-TR ETC
What is missing is a controlling command like this : VBACK-Y/M/C/K (Used to adjust electric potential for removing image fog. My copier fault)
As you think my copier needs firmware.I dont have it and i need it.
Please can you help me?
tinnyjay@hotmail.com

Adjust-V-COUNT,COLOR,HV-PRI,HV-TR
adjustments are in Level 2

level2.JPG
level2_2.JPG
L2_3.JPG

[tinnyjay]

In Service Mode missing some commands like Adjust-V-COUNT,COLOR,HV-PRI,HV-TR ETC
What is missing is a controlling command like this : VBACK-Y/M/C/K (Used to adjust electric potential for removing image fog. My copier fault)
As you think my copier needs firmware.I dont have it and i need it.
Please can you help me?
tinnyjay@hotmail.com

[tinnyjay]

[ATTACH=CONFIG]6677[/ATTACH]

Ok,thank you

[teckat]

for_your_own_safety_please_do_not_smoke_in_bed_poster-p228455633696480411tdcp_400.jpg

[SCREWTAPE]

From his first post i assume that with TB, he meant ITB Assy.

I think tiny was refering TB to, Transfer Belt.

[tinnyjay]

Yes,its true

[Fer]

No harm in doing that. Certainly worth a try and those values should always be entered anyway after performing a clear.
My money is still on a problem with the ITB though.

From his first post i assume that with TB, he meant ITB Assy.

[tinnyjay]

Preventive measures for possible color displacement in the paper feed (sub scanning) and the main scan (front
to rear) direction

read this pdf for 3200-3220

[ATTACH]6664[/ATTACH]

I'm such a nice guy

Not just a nice guy,but a very nice guy

[SCREWTAPE]

Firmware is important too.
Especially DCCON.

When I used to work on these, I had that Tech pub in my bag.

[teckat]

yeah,i found the paper with values.are they right tu put'em back?

Preventive measures for possible color displacement in the paper feed (sub scanning) and the main scan (front
to rear) direction

read this pdf for 3200-3220

iR3200-3220 TP03.pdf

I'm such a nice guy

[blazebusiness]

Yeah,i found the paper with values.Are they right tu put'em back?

No harm in doing that. Certainly worth a try and those values should always be entered anyway after performing a clear.
My money is still on a problem with the ITB though.