Canon C1 Imagepress error codes E000020-0188

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tpant
    Technician

    50+ Posts
    • Apr 2014
    • 67
    #16
    Re: Canon C1 Imagepress error codes E000020-0485

    Originally posted by teckat
    Check to see if the image patch sensor is reading the patches on the drum.

    In service mode <Level 2>DISPLAY>DENS>, check P-SENS-P and P-SENS-S for values.
    If the values are zero, replace the image patch sensor or check that the patch sensor shutter mechanism is working correctly.

    Also, when was last Drum change_? & Dev change_?

    How can I activate the patch sensor shutter from the service mode?

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083
        #17
        Re: Canon C1 Imagepress error codes E000020-0485

        Originally posted by tpant
        How can I activate the patch sensor shutter from the service mode?


        Take it out, and clean

        Or
        there is a way to check the 3 LED sensors on the image patch sensor,

        Enter service mode Level 1, go to <DISPLAY>DENS> , go to second screen and it will display <PCH-LED-1>(front), <PCH-LED-2>(center), <PCH-LED-3>(rear). If any read zero, replace the image patch sensor (FM2-2494-000).
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          Previous 1 2 template Next
          Working...