OPC NP-6330 replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • markoz
    #1

    OPC NP-6330 replacement

    Hello,
    Did anybody try some replace for NP-6330 single drum or drum unit??? It seems to me that it is compatible with NP-1550 but I didn't try it. If anybody try it please help.
    Tags: adjustmen, cleaning blade, help, np6330, npg, one, opc, over, replacement, substitution
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22946
      #2
      The part # for the NP-6330 drum unit is 1322A002AA.
      The closest one might be the NPG-1 for NP-2020
      Another choice might be the drum & blade only kit for the NP2020. They look very similar, but I've never tried substituting.

      For myself, I would just order the NP-6330 drum & get it over with.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • markoz
          #3
          I know that is the best solution (to replace it with original part) but believe it or not i can't find original part (drum and cleaning blade for 6330). They give me a substitution solution 6030 and 1550. I know that 6030 is not the same but for 1550,2020 I'm not sure. I will exchange it if is solution, i expect that copy will be bad because of incompatibility with toner but i will try with NPG-1 toner too, if drum or drum unit can be replaced. Thank you for replay.

            Comment

            • logonjim
              Trusted Tech
              • Nov 2007
              • 136
              #4
              np 6330

              yes i have used both types of drum in the machines i think you have to change to metal plate on the front and they will fit .The quality is not as good as when uses the original drum tho and some adjustments need to be made for quality

                Comment

                Previous template Next
                Working...