Hello, can someone tell me how to remove the itb without damaging the belt.
-
-
If you have the service manuals of irc 3100 then go through it and you will not face any problem to change the itb -
Not a job for the untrained user. There is a lot of disassembly involved with this process and even then you have to be careful removing it!!!Accidents don't just happen. They must be carelessly planned.Comment
-
Yes I am canon trained, though by the question it seems as I am not! I ran across a customer with a c3100 with a copy quality issue and wants me to address it at a later date. I believe it is a drum assembly but just looking at my options. I am trained on the 5800/6800 so they seem to be similar.Comment
-
If you say so,with manual can't be a problem.If it ain't broke, don't fix it
A picture is worth a thousand wordsComment
-
I also have NAVI and checked for the procedure but does not have it, I need the CD to be able to access that information. Is the cleaning blade attached to the ITB or does it slide out? Can I lube the blade or does it go in dry?Comment
-
Thanks canon tech, I get an adobe error message saying, file is damaged and cannot be repaired. is there another way you can send it to me, I would be very grateful. ThanksComment
-
Would you look at that! Thanks, canon.tech, I am feeling a little more at ease.Comment
Comment