Canon LC 9000

[MR Bill]

In the lower feed section there is a shaft and a one way gear. They go bad and the origanal does not feed. All I need is the part # for the shaft and one way gear. I have the service manual but not the parts manual.

Thanks for any help.

PS. Thanks again.

[MR Bill]

I'm talking about the ADF feeder section. Not the paper cassette section.

[teckat]

ADF Lower (1)
ADF LOWER.JPG

3-hb1-2276-000 shaft, separation roller
4-hs5-0070-000 gear, 18t
5-hb1-2285-040 gear, 18t
6-hb1-2288-000 spring, clutch
7-hb1-2273-000 roller, separation, lower
8-hb1-2274-000 roller, loading, lower
9-hb1-2286-000 cam, stop
10-hb1-2287-000 stop, document
14-hs5-0195-000 gear, 30t
16-hb1-2282-000 gear, 19t
17-hb1-2283-000 cam
18-hb1-2284-040 spring, clutch
22-hb1-2502-000 shaft, stop

ADF LOWER (2)
ADF LOWER 2.JPG

8-HB1-2272-040 ROLLER, DOCUMENT EJECT
10-HB1-2271-040 ROLLER, DOCUMENT FEED
11-HB1-2292-000 SHAFT, TRANSMISSION
27-HS5-0198-000 GEAR, 15T

[MR Bill]

That was great Teckat. Just what I needed.

Thank buddy.

[teckat]

That was great Teckat. Just what I needed.

Thank buddy.

Thumbs up.jpg

[kuyo]

Re: Canon LC 9000

Thx Teckat. Can you post the upper ADf parts too?

ADF Lower (1)
[ATTACH=CONFIG]10136[/ATTACH]

3-hb1-2276-000 shaft, separation roller
4-hs5-0070-000 gear, 18t
5-hb1-2285-040 gear, 18t
6-hb1-2288-000 spring, clutch
7-hb1-2273-000 roller, separation, lower
8-hb1-2274-000 roller, loading, lower
9-hb1-2286-000 cam, stop
10-hb1-2287-000 stop, document
14-hs5-0195-000 gear, 30t
16-hb1-2282-000 gear, 19t
17-hb1-2283-000 cam
18-hb1-2284-040 spring, clutch
22-hb1-2502-000 shaft, stop

ADF LOWER (2)
[ATTACH=CONFIG]10137[/ATTACH]

8-HB1-2272-040 ROLLER, DOCUMENT EJECT
10-HB1-2271-040 ROLLER, DOCUMENT FEED
11-HB1-2292-000 SHAFT, TRANSMISSION
27-HS5-0198-000 GEAR, 15T

[teckat]

Re: Canon LC 9000

ADF-UPPER.jpgADF, UPPER/ LC 9000
CLICK ON PIC TO VIEW BETTER

laser class 9000 series
figure no.-----Part number---qty--------description
1------------hb1-2300-000 n-1------frame, adf, upper
2------------hb1-2304-000---1-----stay, pressure (n)
3------------hb1-0638-000---1-----arm, detection (ds)
4------------wg8-5328-000---2-----photo int., oj-695201-701
5------------hh2-2629-000---1-----wire, grounding
6------------hb1-2303-000---1-----spring, leaf, grounding
7------------hb1-2302-050---1-----holder (des)
8------------hb1-2310-000---1-----arm, detection (des)
9------------hh2-2638-000---1-----cable with connector, 3p
10----------ha1-6852-000----1-----roller, eject, upper
11----------hb1-0641-000----1-----shaft, delivery roller
12----------hf5-0220-000-----1-----scanning strip unit (white)
13----------hb1-2301-000----1-----shaft, pressure
14----------hb1-2311-000----2-----sheet, function
15----------hs5-2103-000----1-----spring
16----------hb1-0632-000----1----arm, pressure
17----------hg5-0918-000----1----separation roller ass'y
18----------hb1-2305-000----1----brush, static discharge
19----------hh2-2639-000----1----cable with connector, 3p
20----------xb1-2300-407----6----screw, bh3x4 (s) 21----------xa9-0476-000----2----screw, tp m3x8


This is #17 parts=SEPARATION ROLLER ASS'Y from above picture
figure no.-----Part number---qty--------description

1---HB1-2326-000—1--SPRING, LEAF, GROUNDING
2---HS5-1052-000—4--BUSHING
3---HB1-2312-000—1--ROLLER, SEPARATION, UPPER
4---HS5-0199-000—1--GEAR, 27T
5---HF5-0219-000—1--HOLDER, TORQUE LIMITER
6---HB1-2313-000—1--TORQUE LIMITER
7---HS5-0077-000—1--GEAR, 25T
8---HS5-0196-000—1--GEAR, 29T/44T
9---HS5-9002-000—1--SCREW, M3X4
10--HB1-2327-000—1--ROLLER, FEED UPPER
11--HS5-0076-000—1--GEAR, 15T
12--HS5-2104-000—1--SPRING
13--HB1-2317-000—1--HOLDER, SEPARATION ROLLER
14--HB1-2328-000—N--SHAFT, PIVOT
15--HS5-9001-000—1--SCREW, M4X6
16--HS5-2031-000—1--SPRING
17--HB1-2316-000—1--HOLDER, FEED ROLLER
18--HB1-2319-000—2--SPRING, LEAF
19--HS5-0197-000—1--GEAR, 37T
20--HB1-2318-000—1--FRAME, SEPARATION ROLLER ASS'Y
21--XB1-2300-407—4--SCREW, BH3X4 (S) 22---XD2-1100-242--4--WASHER, RETAININGSEPARATION ROLLER ASS'Y.jpgclick on pic better view

[kuyo]

Re: Canon LC 9000

Great info. Thank you very much.

[zacc44]

Re: Canon LC 9000

Hi guys

Ii cant seem to find a place that carries this part ... if anyone has a source for LC 9000 - Roller Separation Upper HB1-2312-000

[teckat]

Re: Canon LC 9000

Hi guys

Ii cant seem to find a place that carries this part ... if anyone has a source for LC 9000 - Roller Separation Upper HB1-2312-000

===========================

GOOGLE it'
no luck/ time for a new product

This is a product from 1997

check your calender , believe it's 2015

[zacc44]

Re: Canon LC 9000

check your calender , believe it's 2015

yes,
ha-ha.
you are quite funny.
quite the artist with all the color choices !

no, i couldnt "google it" into anything useful, thats why i tried here