73 results in 0.0322 seconds.
-
4345mfp swing plate where to buy a good one? NO OEM left??
Hey guys, just got done buying a cloned RM1-0043 swing plate assembly for a 4345mfp and it did not work quite right....the metal 'tongue' that gets pushed... -
Part Number for iC MF7480 - Pivot Arm/Side Plate for ADF
Someone managed to bend the pin on the ADF unit and it just broke off when trying to straighten it out. The ADF unit is a DADF-P2 if that's relevant.... -
ir7095 for printing
Printer setting>Setting>print Quality>Density
I can adjust the intensity level was 9.
When the level is greater than 5 (6-9).... -
E studio 280: Jams from Ledger & Legal but not 8.5x11 tray
Working on a 280, heres what it does
Top tray 8.5x11 works perfect
2nd tray legal: Jams at least 1 out of 3
3rd tray ledger:... -
CM3530 MP Tray Part?
Have a customer with a CM3530. They broke the small tray that holds/guides the paper when feeding from the MP tray on the right side. This is a small... -
Canon 3300 Drum Cartridge re-build
I am rebuilding a 3300 drum. I did it once and blew it. (Not sure why) Trying again, Does anyone know the best way to clean the PCR roller. -
Risograph RP 3700 problem (vertical lines on monitor)
Hi,
I'm a member of a cultural association based in Bologna (Italy) wich aims to promote independent comics and alternative printing techniques.... -
Toshiba e-studio 283 jam code e920 only when duplexing.
I have a 283 that is showing the jam code E920. I have replaced bridge transport sensors 1 & 2 and verified that the solenoid on the bridge was working.... -
Canon IR4570 with a grinding noise from the document feeder
I have a Canon IR4570 with a grinding noise coming from the doc feeder. It sort of sounds like gears but not as harsh. It will also keep running with... -
Biz 250 jamming
paper gets as far as the reg assembly and stops...what would you change.....( I downloded the ser manual...and it didnt come with the parts portion.....not... -
AR-M350 ADU trouble
I've had this machine with a sticky ADU entry sensor lever. This misfeeds had become intolerable last night so I took the unit off to see if I could fix... -
DP-C262 touch panel not working
I have a DP-C262 that the touch panel does not work. The ten key pad, mode keys, and Start/Stop/Clear Keys all work. The LEDs all light when they are... -
iR 2880i E00045-0000
Machine was throwing this code and I was able to get it to work by pressing in on the bottom of the door, so I checked the door and found a bent hinge... -
bizhub c451 triangle hub on fuser causing LOUD clacking on gate
Does anyone know of a fix for this? That plastic triangle hub on the non op side of the fuser turns to activate the sensors through it pushing on the... -
ir600 0110 code
Hey guys, have an account that is some distance away. They are getting jams when doing 2 sided only. had her look at the jam code and it is 0110 the last...
