Re: AlwaysToner absence occured even replace new for Canon IRC 3580i
Yes sir, I think so I am lucky. we have no senior tech. here. we are relying only to our canon site. Sorry for this sir, but you know it was my first time to dismantle the process assembly, Unfortunately we have no guide to disassemble the unit 1. I found out that the motor was not fitted on Gear 23T, because we are assuming if the motor has the problem, there's error will appeared.. anyway sir, because of your help and also the others we resolved the problem, at least now who can be read this thread will have now knowledge for this fault. and another it is also charge to experience to myself
... thank you very much sir!!! see you on next troubleshooting.Hope to see here soon......
u mean to say in the past four weeks >u never backed tracked to the original PS12 E990-0000 issue /
to check the units that were removed four weeks ago
the first thing u do after u address an issue in your case (PS12),
"Quote"Before it has having error 990-0000 and it was resolved by cleaning of PS12. After we assemble.I start testing.the problem when the color toner was become empty and we replaced it by new cartridge like Yellow, Cyan and Magenta. around 30 copies or more. the yellow toner become empty and it was displaying need to replace new toner for that color"Quote"
1-And another issue appears right after a fix> u immediately address the assembly's you removed in the first procedure.
you are a lucky tech/ in my area a senior troubleshooter tech would have been on site with the first tech the next day to address the issue/
good luck and success on your next issue
to check the units that were removed four weeks ago
the first thing u do after u address an issue in your case (PS12),
"Quote"Before it has having error 990-0000 and it was resolved by cleaning of PS12. After we assemble.I start testing.the problem when the color toner was become empty and we replaced it by new cartridge like Yellow, Cyan and Magenta. around 30 copies or more. the yellow toner become empty and it was displaying need to replace new toner for that color"Quote"
1-And another issue appears right after a fix> u immediately address the assembly's you removed in the first procedure.
you are a lucky tech/ in my area a senior troubleshooter tech would have been on site with the first tech the next day to address the issue/
good luck and success on your next issue
Yes sir, I think so I am lucky. we have no senior tech. here. we are relying only to our canon site. Sorry for this sir, but you know it was my first time to dismantle the process assembly, Unfortunately we have no guide to disassemble the unit 1. I found out that the motor was not fitted on Gear 23T, because we are assuming if the motor has the problem, there's error will appeared.. anyway sir, because of your help and also the others we resolved the problem, at least now who can be read this thread will have now knowledge for this fault. and another it is also charge to experience to myself
... thank you very much sir!!! see you on next troubleshooting.Hope to see here soon......
Comment